Specifications include, but are not limited to: 1) LOT 1- 90ft. Two (2) Span Concrete Bridge (Pine Grove Road @ Cedar Creek) BRIDGE REQUIREMENTS 2 Each - 30ft. Exterior Slabs 2 Each - 60ft. Exterior Slabs 10 Each - 30ft. Interior Slabs 10 Each - 60ft. Interior Slabs 36ft. bridge out- to-out. Bridges and components must include all hardware, elastomeric bearing pads, cold applied joint filled, non-shrink grout, shear key material, and cold applied joint material. Bridge and components must be built in accordance with the Standard Drawing for Bridges (See Attachment F). PRECAST BARRIER RAIL REQUIREMENTS 120 Feet with drain slots- 12 Each- 10ft. sections 60 Feet without drain slots- 6 Each- 10ft. sections (Four ends with guardrail connections) Estimated Bridge Set date: 02/18/2020 2) LOT 2- 70ft. Concrete Bridge (Salem Church Road @ Beaver Dam Road Creek #1) BRIDGE REQUIREMENTS 2 Each - 70ft. Exterior Slabs 10 Each - 70ft. Interior Slabs 36ft. bridge out- to-out. Bridges and components must include all hardware, elastomeric bearing pads, cold applied joint filled, non-shrink grout, shear key material, and cold applied joint material. Bridge and components must be built in accordance with the Standard Drawing for Bridges (See Attachment A). PRECAST BARRIER RAIL REQUIREMENTS 80 Feet with drain slots- 8 Each- 10ft. sections 60 Feet without drain slots- 6 Each- 10ft. sections (Four ends with guardrail connections) Estimated Bridge Set date: 04/27/2020