Specifications include, but are not limited to: A. Body Length: 35 feet ( 3 inches) B. Body Width: 96 to 102 inches ( 1 inch) C. Maximum Overall Height: 130 inches, includes all rigid roof mounted items such as A/C, exhaust, etc. ; . Ramp Clearances. Approach angle shall be no less than 8.5 degrees. Breakover angle shall be no less than 8 degrees. Departure angle shall be no less than 8.9 degrees. B. Ground Clearance. Ground clearance shall be no less than 10 inches, except within the axle zone and wheel area. C. Axle Clearance. Axle zone clearance, which is the projected area between tires and wheels on the same axial centerline, should be no less than 6.3 inches. ; Turning Radius Outside body corner-turning radius for a standard configuration 35 foot long bus shall not exceed 44 feet. 5.1.6.13.5 Maximum Curb Weight Curb weight of the bus, as defined in section 5.1.2, shall be minimized to the extent practical without compromising integrity and durability and shall not exceed 29,500 pounds. ; 5.1.6.13.7 Maximum Axle Load The bus shall be designed not to exceed the GAWR of an axle as defined in Section 5.1.2 of this specification. 5.1.6.13.8 Balanced Axle Load The bus curb weight shall be balanced from side to side on each axle to maintain proper alignment and handling.