Specifications include, but are not limited to: 1. Vendor to remove existing finish to bare material, then stain with custom color provided. 2. After stain is set, vendor to apply 2 coats, minimum, of “MINWAX” polyurethane. Arm rests may require 2 coats of stain to obtain desired color to match existing. 3. Number of arm rests are approximately 1572. 4. Vendor is responsible for all quantities. 5. Vendor may remove arm rests or refinish in place 6. Vendor shall prevent any damage to existing components, flooring, or seating. Any damage done is the responsibility of vendor to repair. 7. Vendor shall coordinate work with convocation center events so as to not have an adverse impact to those events. 8. Row numbers/labels on arm rests will not be disturbed during this process.