A. Minimum Structure Requirements • Custom build 8’ X 20’ ft. mobile food and retail kiosk to listed specifications. • Frame to be set on Hilman style industrial rollers (or equivalent) for mobility. Rollers not to exceed 6” in height. • Welded tie down anchor points on all four sides, to secure kiosk to a concrete pad. • Diamond plated aluminum flooring with drain, all welded to frame. • Diamond plated aluminum paneled walls and ceiling, all welded to frame. • Provide maximum allowable windows on 3 sides with a minimum of 4 serving windows. Windows should be the largest possible size structure will allow. All windows should include awnings with latches to lock in place when open or closed. • All standards and specifications in accordance with the Americans with Disabilities Act Accessibility Guidelines (ADAAG) and the 2010 Standards for Accessible Design shall be met or exceeded. This includes, but is not limited to, windows, doors, and exterior serving counters and shelves. • 34”W access door (opening outward) with lever style handle and keyed latch. Door must be large enough to accommodate installation and removal of all owner supplied equipment. • Roof structure built to be serviceable for repairs to all roof mounted equipment. • Inside LED lighting. • Stainless Steel (restaurant quality) counters spanning along trailer where space allows. • Stainless Steel (restaurant quality) overhead shelving along trailer where space allows. • Built-in IT cabinet 2’ W x 1’ H x 1’ D located within the main structure with power outlet. • Proposal to include customized external vinyl wrap on all four sides.