Specifications include, but are not limited to: 10mm SMD Display - Outdoor Sign;Display Specifications 3’ x7’ viewing area (41” x 7’-3” – Double Face) Double-face LED display must meet or exceed the below minimum specifications. No exceptions will be considered. 1. Pixel Spacing: Center to center pixel spacing must not exceed 10 mm 2. Pixel Design: Each pixel must be separate one from another. No virtual or hybrid pixel technologies will be accepted. Each pixel must be comprised of no more or less than (1) SMD RGB LED. 3. Half-Brightness Viewing Angles: 150° horizontal, +35°/-60° vertical 4. Video & Graphics Capability: The display must be able to show pre-recorded video clips at up to 30 frames per second and live video at 30 frames per second. Software driving display must have the ability to import AVI, BMP, GIF, JPG and other graphic file types. 5. Brightness/Dimming: Maximum brightness must up to 7,500 nits daytime brightness. Sign to automatically dim by longitude / latitude internal settings & include photocell. 6. Temperature Display: Bid must include temperature sensor for real time display of temperature. 7. Data Integration: Display must have the ability to display RSS feeds for real time data such as news, sports, weather, etc. 8. LEDs must be lifetime rated at 100,000 hours. Lifetime is defined as the point at which the LED degradation reaches 50% original brightness.; Remove existing inoperable box sign off of existing poles Install new signage with lighted top ID cabinet acrylic faces with vinyl lettering Install 41” x8’3” full color 10mm message center Sign will have a bottom cowling (pole cover) On-Site Training to be provided to Customer Unlimited webinar training to customer Life of Sign broadband communications
