Coastal Carolina University seeks a source to supply and deliver an air filtration and exhaust system compatible with the Trotec Speedy 400 laser engraving machine. The system must meet the specifications outlined below to ensure safe and efficient operation. Exhaust Unit Specifications • Airflow / Pressure: Minimum 735 CFM / 100 mbar • Noise Level: Less than 68 dBA at typical operating speed • Certifications: UKCA, CE, cUL, UL* • Power Requirements: • Preferred: Operable on a 110V line • Acceptable: Operable on a 220V line (will receive full consideration) • Connection Compatibility: • Must be compatible with the Trotec Speedy 400 • Exhaust port size: 4 inches Filtration Specifications • Pre-Filter Requirements: • Minimum filter efficiency: 95% @ 0.9 microns • Inlet size: 125 mm (0.41 ft) • Dropout chamber capacity: 58 liters • Filter media pleat size: 200 mm (0.65 ft) • Main Filter Requirements: • Must be rated for both HEPA and gas filtration • Combined HEPA/gas filter specifications: • HEPA filter media: Borosilicate • Gas filtration: Treated activated carbon • HEPA filter efficiency: 99.995% @ 0.3 microns Documentation Requirement Offeror must provide documentation • Compatibility with the Trotec Speedy 400 • Connection specifications • Performance data for both exhaust and filtration systems
