Specifications include, but are not limited to: 5.1 CAPACITY RATED: The capacity rating shall be a minimum of 5,000 lbs. 5.2 POWER: The engine shall be a LP gas 2.4 liter capable of producing a minimum of 52 horsepower @ 2600 rpm. 5.3 TRANSMISSION: The transmission shall be 1-speed forward and 1- speed reverse, power-shift torque converter transmission producing a minimum of 9-m.p.h. ground speed. 5.4 MAST: A 3-stage full free lift mast that is so designed to enhance/increase the operator’svisibilityshallbeprovided.Themastalsoshallbesodesignedtohelpprotectthe lift cylinder and hydraulic lines from being damaged. A maximum fork height of 180-inches and a lowered height of 86-inches is desired. A minimum free lift of 36-inches is suitable. The mast shall be equipped with a side-shift feature. The mast shall have a forward and backward degree tilt no less than six degrees. 5.5 LIFTING CAPACITY: The basic lifting capacity of the lift truck shall be a minimum of 5,000 lbs. with a 24-inch load center. 5.6 LIFT SPEED: The lift speed shall be a minimum of 108 feet per minute. 5.7 FORKS: The forks minimum dimensions shall be 48-inches long, 4-inches wide, and 1.4- inches thick. A backrest with a minimum height of 48-inches is suitable.