Specifications include, but are not limited to: All cable used for Data Network will be Category 6 Belden, (plenum Datatwist-7882A) (non-plenum Datatwist-7881A). Unless specifically stated otherwise by SSD, plenum rated cable will be Yellow in color and non-plenum rated cable will be Blue in color. The Belden Cat 6 cable will be installed under the Belden guidelines for that particular cable. The cable will be in reels of 1000’ minimum when cable is purchased for the project. Subsequent shorter runs on the same project will take advantage of leftover short spools of cable. Cable must be Plenum rated unless specifically stated otherwise by SSD. Below is the recommended fill chart for Cat 6 BELDEN Datatwist-7882A cables in areas where conduits are used. Surveillance and access control, use Red or Purple cable. Wireless access points, use Green cable Standard Access ports (Computers/Printers) use Blue cable.
