3.1 GENERAL A. The District will be responsible for the following: 1) Remove exterior fencing at FDHS and reinstall after the project is completed 2) Site preparation grading and grubbing 3) Concrete pad at FDHS and SHS 4) Termite treatment prior to concrete poured 5) Hook electrical up from structure to electrical connections. 6) Hook plumbing up from structure to water and sewer lines if needed 7) Door hardware for exterior doors 8) Dispensers to include paper towels/toilet paper/soap 9) Locate existing utilities 10) Relocate the utilities as needed B. The Contractor will be responsible for the following: 1) All field measurements and area for containers 2) Containers must be 2022 or newer and never transported hazardous materials. 3) Three (3) year warranty on workmanship The Contractor will be responsible for the following: (continued) 4) Obtain drawing approval and all permits required 5) All equipment required for the project to include but not limited to lifts, cranes, etc. 6) Delivery and complete set-up of containers 3.2 Fort Dorchester High School Press Box and Locker Rooms A. Foundation and Exterior 1) Paint Exterior of container school colors with school name and mascot 2) Slight angle of roof to allow for runoff 3) Gutters and Downspouts 4) Doors must be 36” and swing out with awning above each door i. Doors no lite 5) Two (2) side-mounted metal stairs, stair treads, landings, handrails, pickets, framing and support structure/column shall be galvanized steel or aluminum 6) Two (2) Flag mount/holder posts on upper container corner facing field 7) Electrical service panel for entire unit B. Bottom Container 1) 40’x8’x9.6’ shipping container 2) Divided into two (2) locker rooms i. 32’ locker room, door centered on 8’ wall a. Lockers on both sides of 32’ walls ii. 8’ locker room, door centered on 8’ wall a. Lockers on both sides of 8’ walls 3) Epoxy flooring 4) Spray foam insulation 5) Finished interior with shiplap walls i. Paint school colors 6) Lighting, outlets. switches 7) Two (2) Mini split unit A/C and Heat to service each enclosed room C. Top (Stacked) Container 1) 40’x8’x9.6’ shipping container 2) Divided into two spaces i. 32’ locker room, door centered on 8’ wall a. Lockers on both sides of 32’ walls ii. 8’ Press Box, door on side 8’ wall a. 8’x2’ counter – field view b. solid surface material countertop (no laminate) c. Two (2) 36”x36” sliding windows for announcing and field view d. One (1) standard window back wall 3) Epoxy flooring 4) Spray foam insulation 5) Finished interior with shiplap walls i. Paint school colors 6) Lighting, outlets, switches 7) Two (2) Mini split unit A/C and Heat to service each enclosed room D. Locker Room 1) Lockers 24”x18”x72” i. Color: Maple ii. Upper shelf with cubby iii. Bottom cubby with seat and flip up lid with padlock hasp a. No Cushion iv. 2 double garment hooks
