Specifications include, but are not limited to: “EDUCATOR” Series Greenhouse Structure (Lot 1 of Bid) One 1(1) 24’ wide x 48’ long Greenhouse with 6’ sidewalls Galvanized steel frame consisting of: A. Column Post: 2” x 4” x 14-gauge rectangle with welded plates – 6’ spacing B. Bows: 2” x 3” x 14-gauge rectangle – 6’ spacing C. Trusses: 2” x 2” x 14-gauge square, spans 11’-11” wide D. Uprights: 1-3/8” round E. Purlins: eight (8) runs 1-3/8” round F. Ridge: Extruded Aluminum ridge cap allows easier installation and maintenance G. Roof Glazing System: Extruded Aluminum roof channels spaced 6’ apart H. Roof Glazing: 8mm clear twin wall no drip panels (10 yr warranty) I. Eave Glazing System: Aluminum extruded eave channels allows easier installation and maintenance J. Eave Glazing: 8mm clear twin wall no drip polycarbonate (10 yr warranty) K. Wind and Snow Loads: a. Wind Load (WL) – 115 mph, 3 second gusts b. Snow Load (SL) – 10 lbs. psf, Ground Snow c. Risk Category – II End Gables: Front End Gables: Framed for two (2) 30” exhaust fans and one (1) 48” x 7’-0” ADA compliant single swing door with 24” x 30” tempered glass light kit A. Framing studs: 2” x 2” x 14-gauge square with brackets for wedge anchor attachment B. Horizontal Purlins: 2” x 2” x 14-gauge square C. Base Extrusion: Aluminum base extrusion attractively seals and “trims out” base of greenhouse Rear End Gables: Framed for 4’ x 15’ Evaporative Cooling System and one (1) 48” x 7’-0” ADA compliant single swing door with 24” x 30” tempered glass light kit A. Framing studs: 2” x 2” 14-gauge square with brackets for wedge anchor attachment B. Horizontal Purlins: 2” x 2” 14-gauge square C. Base Extrusion: Aluminum base extrusion attractively seals and “trims out” base of greenhouse D. End Gable Glazing: 8mm clear twin wall no drip polycarbonate panels, complete framing, glazing, and extrusion package (10-year warranty) Ventilation: A. Two (2) 30” Quietaire GCS slant wall exhaust fan, 1/2hp: 6956 cfm each @ .10 SP 110V or 220V. a. One (1) fan is to be a 2-speed fan b. One (1) fan is to be a single-speed fan i. both equipped with shutter and guard B. One (1) 24” Motorized Quietair Shutter, located above cooling pad C. 4’ x 15’ Stainless Steel Quietair Evaporative Cooling System with trough, plate and 6” thick pad, sump pump and float valve, must be self-contained D. 4’ x 15’ Automatic Wall Vent located behind the evaporative cooling system Heating/Air Circulation: A. One (1) 150,000 BTU – L.P. Modine Gas heater, model PTP150S B. Two (2) Horizontal Air Flow Fans (HAF) 18”, 3 blades with guard and split capacitor Automatic Temperature Control: A. Bartlett Instrument Company Climate Boss Controller with touchscreen technology
