Specifications include, but are not limited to: Hilton Head Fire Rescue is seeking a trailer to store and haul one (1) inflatable rescue boat, one (1) Jon style boat, motors for both boats, and related flood water personal protective equipment. a. Trailer and components shall be constructed with saltwater resistant materials. Bidder shall specify in their bid which saltwater resistant materials are being used, either aluminum or galvanized steel. b. Gross vehicle weight rating minimum 10,668 lbs. Maximum carry capacity approximately 8,000 lbs. c. Two 6,000 lbs. submersible torsion axles with sure lube bearing system d. All wheel electric over hydraulic disc brakes with stainless steel calipers e. 2 5/16” coupler shall be provided. f. All LED lights and electrical connections are sealed and submersible. g. All lighting will conform to DOT standards. The middle or top rack will have brake lights and three bar light but no amber marker lights h. Tongue jack to support trailer. Trailer plug will be standard seven pin plug with additional wires available for emergency and scene lights. i. ST225/75R15 ok as is load range D trailer radial tires rated at 2,540 lbs. per tire j. Manufacturer to supply one spare tire mounted on wheel with mount k. Single bottom, adjustable width, wood covered carpet style bunk to accommodate aluminum 15’ Jon style boat or Inmar model 470-SR-Hd 15’6” boat. l. The lower and upper boat storage sections shall provide minimum 36” clearance between them, front to back. m. The lower rack shall allow the boat motor to be attached to the boat for short transport capabilities and have a transom support. n. The middle boat rack will have 2” PVC rollers over aluminum or galvanized pipe that go across the frame rail at each cross member for the Inmar inflatable boat to sit on. o. A top storage rack will be provided above the middle boat rack. Storage rack will be similar style and construction as the lower sections. p. Top storage rack will have aluminum diamond plate or other slip resistant tread plate flooring with water drain holes capable of supporting 1,000 pounds. q. The top rack will have a top rail spaced 16” above the floor section and will be constructed of similar materials. r. The top rack will not extend past the lower racks on the front of the trailer.