One (1) Hobart Model C44A dishwasher, 208 volt / 3 ph, with right to left direction operation, including one 30 KW built-in electric booster heater, and two 4 X 16 vent cowels. Dishwasher shall also include: • Opti-Rinse system using no more than .64 gallons per rack at 20 psi. • Final rinse rate to be 2.13 GPM or 128 GPH. • Ball detent clutch drive system to prevent damage to conveyor and drive motor if rack should be obstructed. • Anti-jam protection to include an electronic sensor to monitor the drives output RPM and electrically shut the unit off in the event of a change in RPM. • Dual side pawl conveyor driven by 1/6 HP motor providing a simultaneous even push through of the racks. • Auto-Position™ rinse arms, which ensure that the rinse arms and nozzles are properly seated in the machine to provide a consistent sanitizing rinse pattern. • Soil management system with SST slanted surfaces, screens and deep collection basket. • Minimum capacity of 202 racks per hour. • Dishwasher unit length to be a minimum of 44". • Top mounted solid-state controls mounted in SST enclosure. • Field convertible for low temperature or high temperature final rinse application. • Tank and chamber to be constructed of #16 gauge stainless steel. • 2 HP Wash motor with inherent overload protection and manual reset located on the motor. • Stainless steel, self-draining pump and stainless steel impeller. Pump capacity of 151 gpm. • One 15 KW electric immersion heater.
