1. Concrete: • 4” Sidewalk – SCDOT Class B • 6” Driveway – SCDOT Class A • Curb and Gutter – SCDOT Class A • Performed joint filler – Shall be no extruding and resilient bituminous type and should perform to the requirements of ASIM Designation D 1751. • All material shall be certified by the producer or manufacture that the furnished materials meet the specific requirement of the specification. • Concrete must meet all SCDOT Standards • Expansion material must meet all SCDOT Standards • Handicap detectable warning shall be SCDOT standard Details – dwg 720-905- 01, 02720-910-01 & 720-910-03, Wet Inset – Color Grey 2. Masonry: • All pavers or brick will be chosen by City Staff and purchased by the City of Conway • All pavers to be installed on concrete bedding with the use of leveling sand and connected with mortar. • All brick to installed per ICC building codes 3. Workmanship: a. Subgrade Condition • The finished subgrade shall be maintained in a smooth, compact condition and any areas which are disturbed prior to placing of the concrete shall be restored at the contractor’s expense. The subgrade shall be moist at the time the concrete is placed. Water shall be uniformly applied ahead of the pouring operations as directed by the engineer. Large boulders and other obstructions shall be removed to a minimum depth of 6-inches below the finished subgrade elevation, and the space shall be backfilled with sand, base course material or other material or suitable material which shall be thoroughly compacted by rolling or tamping...
