Specifications include, but are not limited to: HOLDING 1 • Interior Caging Front Panel, approx. 5-ft. W x 6-ft. 3-in. H, including keeper access door, approx. 2-ft. W x 6-ft. H, with a butterfly latch. • Interior Roof Panel is approx. 5-ft. W x 5-ft. 4-in. deep • Exterior Caging Front Panel, approx. 5-ft. W x 6-ft. H, including keeper access door, approx. 2-ft. W x 6-feet H, with a butterfly latch. • Exterior Caging Roof Panel, approx. 5-ft. W x 8-ft. deep • Construction Materials - All caging should be constructed of Class II Caging – HSS 1.5”x1.5” frames with 1”x1”x12.5ga., welded wire mesh or pre-approved equivalent HOLDING AREA REQUIREMENTS • One (1) Guillotine animal transfer door, labeled “G” on the drawing (manual, cable operated), with 18”x24” door opening, constructed of 3/4” thick polypropylene. Guillotine transfer door should be lockable in open or closed position. • Two (2) Keeper access doors with butterfly latches approx. 2-ft. 6-in. W x 6-ft. H (Galvanized). QUARANTINE 1, 2, & 3/3.1 • Interior Caging Front Panels for Q1 and Q2, both are approx. 6-ft. 1-in. W x 6-ft. 8-in. H, including keeper access doors, approx. 2-ft. 6-in. W x 6-ft. H, with a butterfly latch and a lockable feed chute. • Interior Caging Front Panel for Q3, approx. 6-ft. 8-in. W x 6-ft. 8-in. H, including access keeper door, approx. 2-ft. 6-in. W x 6-ft. H, with a butterfly latch and a lockable feed chute