Specifications include, but are not limited to: .Verify all building dimensions to complete the scope of work. B.Obtain applicable building permits (electrical, mechanical, etc.). Town building permit fees are waived. C.Disconnect, remove, and dispose existing boiler. D.Disconnect and remove existing 40-gallon hot water tank. Place hot water tank in truck bay as directed by the Town. E.Prepare existing boiler room for new boiler and indirect water heater, clean and neat. F.Furnish and install Navien NFB-301C Condensing Fire Tube Boiler (301,000 BTU), or approved equal, with associated appurtenances and fixtures (i.e. backflow preventer, expansion tank, zone relay, etc.) per manufacturer requirements and building codes. G.Furnish and install indirect 50 gallon water heater, by Heat Flo Inc. or approved equal, with associated appurtenances and fixtures per manufacturer requirements and building codes. H.Connect all electrical components, fire alarms, etc. in accordance with applicable building codes and manufacturer requirements. I.Connect to existing gas service in accordance with applicable building codes and manufacturer requirements. J.Connect all plumbing components in accordance with applicable building codes and manufacturer requirements.