Specifications include, but are not limited to: 1. Lightly screen to remove accumulated minor dents and scratches. 2. Thoroughly clean the floor surface after screening is completed prior to applying the coat of dispersed sealer. 3. Existing game lines will be touched up where needed. Paint will be allowed to dry for a minimum of 24 hours as needed. 4. Using a clean lambs wool applicator, apply a liberal and uniform coat of water dispersed sealer with at least the minimum coverage per the manufacturer's instructions. Allow to dry completely. 5. The entire surface should then be lightly machine disked with #100 or #120 grit screenback under a buffing or polishing pad and finally vacuumed and tack-ragged in preparation for the first coat of dispersed water finish.