Specifications include, but are not limited to: Chimney Repair: Remove two (2) of the chimney caps. (north and south chimneys) Install, in all three (3) chimneys, an insulation material as close to the roof line as possible to prevent interior condensation. Install a custom chimney cap on three (3) chimneys, covering the flues. Clean the exterior of the (3) three large red brick chimneys Chip, grind, remove all loose and deteriorating mortar on all chimneys Repoint all joints using a lime content mortar best suited for red brick and use in wet salty air. Modern materials specified for use in repointing mortar should conform to specification of the (ASTM) American Society for Testing and Materials or comparable federal specifications and the resulting mortar should conform to ASTM C 270, Mortar for Unit Masonry. Waterproof the red brick on all four sides of the three (3) chimneys.