Specifications include, but are not limited to: The capsule press should be a: Inox (316 stainless steel) hand-held 300-hole filler that is dishwasher safe & can be used under a powder hood or in a glove box. The filler should include the following parts: Hand-Held Filler Base, Orienter Base, Locking Plate, 60-Pin Tamper, Powder Spreader, Powder Tray, Powder Tray Clamps, Plastic Storage Box, Capsule Bins, Measuring Bowls and Change Parts (including a caps tray, body sheet set, spacer plate, capsule locker, and orienter tray). The capsule press should have the following features: Shipped fully assembled. All parts should be dishwasher safe. Can be dried in a hot air oven or with a portable hair dryer. Efficiently change out capsule sizes. Change parts assemblies for size 0, 1, and 2 An orienter base which accommodates capsule sizes 0, 1, and 2 All metal parts Inox (SS316) for reduced static Unique features include lightweight 2-piece orienter, Orienter Locater and oversize Powder Tray & Push Plate Designed for fast disassembly & visual verification of cleaning Fill weights, USP/EP method within ± 1-3 % of average. Works with all capsules including gelatin, vegetarian/HPMC and starch capsules The filler should have tamper size range optimized for higher fill weights and faster filling. The filler should have indicator gauges to assist in capsule orientation, separation and locking. Fits under most powder hoods and in glove boxes. The filler should fully lock the capsules after filling. Compliance: CE, cGMP Include validation package as a separate line item