Specifications include, but are not limited to: 1. Furnish and Install two (2) solar powered, pedestrian activated crossing systems as manufactured by TAPCO, or approved equal, at the bike and pedestrian crossing located on Warren Avenue at First Street (see attached figure). 2. At a minimum, the system shall include the following: - (2) 17- foot Traffic Signal Posts and Pedestals (octangular), painted black, with base and foundation. - (2) 55W Solar Control System with Radio - (2) Accessible Pedestrian push buttons with R10-25 signs - (8) Single Section, 12-inch Yellow LED Signal Modules with housing - (4) 30” W11-15 Signs – combo bike/ped sign - (2) 24x12 W16-7L Down Left Arrow Sign - (2) 24x12 W16-7R Down Right Arrow Sign - (2) NEMA Enclosures for all Components - (2) Battery Systems - All Necessary Mounting and Supporting Hardware for a Complete Working System.