Specifications include, but are not limited to: 1. The Building Study shall include an Existing Conditions Report for the building and the site
including the parking lot on the east side of the building. The existing conditions report shall
include a general assessment by all architectural and engineering disciplines including
architectural, structural, mechanical, electrical, plumbing, HVAC, fire protection, hazardous
materials, accessibility, and site civil engineering including parking, accessibility, bus drop
off, stormwater management and wastewater treatment. The existing conditions report shall
identify any building deficiencies. There is an existing Facility Condition Assessment for
the building which was produced by EMG. This should be used as a resource document but
does not relieve the Respondent to this Request for Proposal from providing an independent
assessment with up to date cost estimates.
2. The Existing Conditions Report shall analyze and provide the structural load bearing capacity
for each floor of the existing building. This shall be done by a structural engineer who is
part of the successful Respondent’s team. Information on required floor loads for facilities
of this nature including storage area floor loads shall also be provided and compared to
existing floor load capacities.