Specifications include, but are not limited to: 1. The Building Study shall include an Existing Conditions Report for the building and the site including the parking lot on the east side of the building. The existing conditions report shall include a general assessment by all architectural and engineering disciplines including architectural, structural, mechanical, electrical, plumbing, HVAC, fire protection, hazardous materials, accessibility, and site civil engineering including parking, accessibility, bus drop off, stormwater management and wastewater treatment. The existing conditions report shall identify any building deficiencies. There is an existing Facility Condition Assessment for the building which was produced by EMG. This should be used as a resource document but does not relieve the Respondent to this Request for Proposal from providing an independent assessment with up to date cost estimates. 2. The Existing Conditions Report shall analyze and provide the structural load bearing capacity for each floor of the existing building. This shall be done by a structural engineer who is part of the successful Respondent’s team. Information on required floor loads for facilities of this nature including storage area floor loads shall also be provided and compared to existing floor load capacities.