Dimensions/G.V.W MINIMUM REQUIREMENTS GVW rating - 78,000 pounds minimum GCW rating - 80,000 pounds minimum 60" clear back of cab (drivers side) Setback axle Wheelbase - 260" minimum, must be verified by manufacturer Cab to trunnion - 190" minimum, must be verified by manufacturer Trunnion to after frame - 130" Maximum unladen chassis height 44" Frames MINIMUM REQUIREMENTS Double rail, full inside channel, with minimum 3.25" flange Minimum RBM- 3,500,000 inch-pounds per rail Minimum Section Modulus 29.45 Frame rails treated w/ Tectyl 185GW Pigmented 2.8 voe for rust resistance Clear outside frame rail RH and LH side back of cab I-beam cross members Swept back steel bumper Front tow hooks Two rear tow hooks 60 inches of clear frame rail space behind cab for log loader system COMPLY __ _ All fuel tanks, air tanks, air drier, etc. shall be located either under the cab or on the inside of the frame rails. It is the responsibility of the vendor to coordinate with the body company to ensure that all equipment mounted on the frame rails (battery box, air tanks, hydraulic tank, toolbox, etc.) will fit in such a matter as to be functional, serviceable, and give adequate clearance for body/chassis movement and wheel travel in all normal conditions. Engine Diesel/Engine Equipment MINIMUM REQUIREMENTS Minimum 430 HP at 1500-1700 RPM, Minimum1600 lb ft torque @ 1300 rpm Minimum 13 Liter, wet sleeved Engine to utilize current SCR emission technology / CARB compliant. Inside/outside air intake w/in-cab controls Alternator - 12V 160 amp Batteries - (3) 12V 1000/3000 CCA Engine block heater 120 volt/1500 watt includes block heater socket receptacle
