Specifications include, but are not limited to: Remove old oil from unit and empty into 55-gallon drums. Coordinate with environmental company to remove 55-gallon barrels from the property and dispose of legally and safely. Demolish and remove old fluid tank and its mechanical contents, i.e. Motors, pumps, valves, mufflers and associated piping. Furnish and install a new 80-gallon tank and Hydraulic Power Unit (HPU) Add 80 gallons of new hydraulic fluid Make necessary adjustments Test and Return to service PUMP: ALWEILER MOTORS: 15 HP-50 HP, Imperial or US Electric Motor (~3400 RPM) VALVES: MAXTON-(4) Coils for Up, Up Leveling, Down and Down Leveling MUFFLERS: Design with Max Pressure of 825 psi TANKS: Design, Gray Painted Steel 80 Gallon: 42.5” Long X 20” Deep X 41”High 140 Gallon: 46.5” Long X 30” Deep X 41” High 190 Gallon: 51.5” Long X 30.5” Deep X 48.5” High *NOTE: A Switch tree is an optional accessory and can be included on request. Switch tree includes: (2) Low oil sensors and an oil over/under temperature thermostat. JOB SPECIFICATIONS: Tank Capacity: 80 Gallon Tank Full Load Working Pressure: 284 PSI New Motor Horsepower: 15HP New Motor Voltage: 200 VAC New Motor Full Load Amps: 52 AMPS New Motor Starting Amps: 126 AMPS Valve Coil Voltage: 115 VAC New Pump Size: 75 GPM Resulting New Car Speed: 92 FPM