Specifications include, but are not limited to: 1 EA Triangle Engineering Abrasive Cutter Model WTC-20HR Weld Coupon Abrasive Cutter. Approximate Specifications for Substitutions: • CAPACITY PIPE: 10" SCH 160 THRU 2" SCH 5 x 9 1/2" LONG (max) • CAPACITY PLATE: 1" THICK MAXIMUM X 9 1/2" WIDE • WHEEL DRIVE MOTOR: 15 H.P. 440V 3PH - 60HZ 18A 3525 RPM • WHEEL SPINDLE: HEAT TREATED 4140 ALLOY, 2175 RPM, C.C.W. ROTATION VIEWED FROM WHEEL SIDE. • BLOWER MOTOR: 1 H.P. 440V, 3 PH - 60HZ, 2A, 3450 RPM • AIR SUPPLY: CLEAN DRY AIR AT 80 PSI, MIN. 2 CUBIC FEET PER CYCLE • AIR-OIL TANKS: MEDIUM HYDRAULIC OIL S.S.U. • LUBRICATORS: LIGHT SPINDLE OIL APPROX. SUS - 200 @ 100 F OR SAE - 10 • WEIGHT OF MACHINE: APPROXIMATELY 2240 lbs. • APPROXIMATE FLOOR SPACE: 42 1/2" X 72" X 85" HEIGHT • NO GRINDING NECESSARY EXCEPT TO REMOVE WELD BUILD UP AND APPLY RADIUS TO SPECIMEN. • SPECIMENS REMOVED IN ACCORDANCE WITH ASME, AWS, API AND OTHER APPLICABLE CODES. • CUTTING FIXTURES AVAILABLE FOR PIPE AT LEAST FROM 2" SCH. 5 TO 10" SCH. 160 AND PLATE UP TO 1.5" THICK. • EQUIPMENT DESIGN ALLOWS SAFE OPERATION BY PERSONNEL WITH LIMITED OPERATING INSTRUCTIONS. • CUTTING OPERATION CANNOT BE INITIATED UNTIL ALL SAFETY INTERLOCKS ARE ENGAGED. • ALL OPERATIONS INITIATED FROM A CENTRAL CONTROL PANEL AND MAY BE STOPPED AT ANY TIME.
