Specifications include, but are not limited to: Freezer Outside dimensions: 25’ long x 8’ 2.75” wide x 8’ high. Indoor -10° F Freezer includes 4” insulated flooring with interior ramp. 1/8” diamond aluminum treadplate interior finish. Interior wall finish to be .040 white stucco aluminum, interior ceiling to be .040 white stucco aluminum, exposed exterior to be .032 stucco aluminum, unexposed exterior to be .032 stucco aluminum. 48” x 77” flush mount magnetic infitting door with cam-rise hinges, padlockable deadbolt handle (exterior doors only), 1097 door closer, brushed hardware, fully programmable Intelligent/Smart Controller with audio/visual temperature alarm with digital thermometer, high and low set points, energy saving door frame heater wire, vapor proof light and switch with pilot light. Basic remote refrigeration system. Indoor refrigeration 13,241 BTUH system capacity, sized for a walk-in heatload of 10,300 BTUH. System to be a 5.0 horsepower hermetic scroll water-cooled unit with a BTUH matched standard Quick Response Controller (QRC) evaporator coil. Accessories must include: Heated pressure relief vent. Floor ramp interior, 24” deep for up to a 48” door. Vision window, 14” x 24” heated (if kickplate provided 36” maximum height). Intelligent/Smart Controller with WIFI capability and Panic Alarm. LED light fixture freezer, 48” 2-lamp (-40 degrees Fahrenheit or higher operating temperature). 2” bumper rail, flexible vinyl covers with rigid vinyl base. 2. Cooler Outside dimensions: 30’ 3.25” long x 10’ 1.75” wide x 8’ high Indoor 35° F Cooler includes three (3) sets of doors, two (2) standard and a glass door opening (see diagram).
