Specifications include, but are not limited to: The unit shall be an enclosed package. The unit shall be packaged in an appliance style fashion and all exposed ferrous metal panels shall be powder coat painted. The unit shall be manufactured with four (4) through holes on the base mount plat to facilitate the customer’s needs to bolt the unit to the floor if deemed necessary. All components on the unit shall be located inside the confines of the base dimensions of the unit. The standard dimensions shall be 88” L x 34” D x 70” T. There shall be two (2) bolt-on style panels on the rear of the unit. The rear top panel shall be designed to be removed if major work on the compressor block is required and the rear lower panel shall be designed to be removed to gain access to the electric drive motor. There shall be a left hand and a right hand hinged access door to facilitate service and minor repairs on the unit. Each door shall have dual lock(s). The left door shall be equipped with a safety switch. The safety switch shall be integrally wired to the PLC to eliminate the possibility of startup of the unit while the door is in the open position. If the unit is in the operational mode and the access door is dislodged, the unit shall immediately cease operation, as well as provide the operator with the correct information, on the display screen, that the left door is ajar. An audible alarm shall also sound if the door is dislodged while in the operating mode.
