Specifications include, but are not limited to: Base Model 1.Truck must be a Conventional style chassis. ___ ___ _____________ 2.Minimum of 25,000 GVW rated ___ ___ _____________ 3.Extended cab configuration ___ ___ _____________ 4. Shall include options “severe, rugged service, heavy duty” ___ ___ _____________ 5.Shall include all standard equipment plus any extras listed below.___ ___ _____________ 6. Truck shall be manufacture’s approved GVW capable of fullLoad capacity of the installed mechanic service body and Equipment, including a trailering capacity of 14000 lbs ___ ___ _____________ 7. Chassis shall be the shortest wheel base permissible to Mount service body and equipment. ___ ___ _____________ Engine and Engine Equipment Specifications 1. Must have a diesel turbocharged with at least 325 hp and 750 LB-Ft peak ___ ___ _____________ 2. Wet sleeve design. ___ ___ _____________ 3. Cold start kit. ___ ___ _____________ 4. Cruise control. ___ ___ _____________ 5. Engine retarder. ___ ___ _____________ 6. Spin on fuel and oil filters. ___ ___ _____________ 7. Fuel/ water separator with heater. ___ ___ _____________ 8. Minimum 1500 watt/ 110-120 volt Engine block heater. ___ ___ _____________ 9. Minimum 1500 watt/ 110-120volt Oil pre-heater ___ ___ _____________ 10. 12V Starter. ___ ___ _____________ 11. Minimum 130 amp 12 V alternator ___ ___ _____________ 12. 12V Batteries capable of at least 2500 CCA. ___ ___ _____________ 13. Long life Antifreeze with Spin on filter. ___ ___ _____________ 14. Lower radiator drain valve. ___ ___ _____________ 15. Bug screen between grill and radiator. ___ ___ _____________ 16. Dual element Cowl air cleaner. ___ ___ _____________ 17. Cab side mounted vertical exhaust with elbows, mufflers must have heat shields. ___ ___ _____________ 18. Jump start terminals mounted under hood
