Specifications include, but are not limited to:Each Trade In Value A trade-in allowance is required for the equipment described below. Items listed as trade-ins are offered on an “as-is” and “where-is” basis. No condition or warranty is implied. To be acceptable to the State, a trade-in price must equal or exceed fair market as determined by the State. The STATE reserves the right to accept and award bid with or without trade in option. TRADE IN OPTION Make: CAT ID# 22Z00896 Model# T249 950B Hours: 19,413 *estimate (While there are 9,828 hours on the hour meter, there is a note next to the meter that appears to indicate there had been 9,585 hours on the machine and that the meter was changed out.) All trade-in equipment will be maintained by the state in a reasonable manner until removal. Removal shall be the responsibility of the bidder. Invoice payments may be held if the trade-in is not removed promptly. Bidders may inspect trade-in equipment at 1823 Mill Road Grand Forks, ND 58208-3078. Contact Chad Avdem at 701-795-7238 to make an appointment for inspection of equipment. $ $ 2. 1 Each Wheel Loader · Diesel engine with a minimum of 220 net rated horse power · Engine to have 24 volt starting and charging system · Heavy duty electric starter · Electronic powershift transmission · Four speeds forward and three speeds reverse · Differential lock/Limited Slip · Deluxe cab, ROPS, air conditioning, heat · Maximum height to top of ROPS 12’ -0” · Maximum width 10’ -0” · Suspension instrumentation to include ride control · Hour meter, must only mark time when engine is running · Single joystick hydraulic controls · Minimum machine operating weight of 43,000 lbs. · Four wheel drive · Rear vision camera with color display screen · Back up alarm
