Specifications include, but are not limited to:Listed below are the general terms and conditions associated with supplying the Trucks and Vans (Model Year 2016 or Later) to the State of Delaware, its agencies and authorized organizations. a. The specifications indicate MINIMUM requirements. b. The vehicle Manufacturer's model name AND model number shall be indicated in the bid proposal. All manufacturer option codes requested in the minimum vehicle specification requirements shall be listed on the Appendix B – Pricing spreadsheet. Failure to properly identify the model and all associated option codes may result in the vendor’s response being deemed nonresponsive. c. Standard solid exterior colors with standard interior trim shall be selected after the award is made unless otherwise indicated in the bid. d. Tire size and type shall be OEM. e. Each vehicle shall include all required equipment as listed in this specification unless deletion is listed in the bid. f. The vehicle shall be new and of the model year, or newer, indicated in the bid. g. The vehicle specifications provided show the MINIMUM requirements for each vehicle specification requested. h. The vehicle shall include all genuine parts, accessories and equipment considered standard by the manufacturer for the vehicle offered by the bidder. i. If items listed under Options on specification sheets are desired they must be specified by the Using Agency. These items shall not be furnished by the contractor unless specified in the specific agency Purchase Order. j. Each vehicle shall be clean, lubricated and serviced ready for immediate service. k. Each vehicle shall be protected to 20 degrees Fahrenheit below zero with permanent type antifreeze.
