Specifications include, but are not limited to: A. Remove all debris from roof surface. B. Photograph and document any deficiencies on the Roof Inspection Checklist, Exhibit A-1. Immediately notify the CHP Facilities Coordinator of all deficiencies. C. Inspect interior of building for signs of water penetration, frost build-up, and structural distress. On-site contact/designee will walk the facility with you. D. Inspect exterior of building for continuity of roof covering, deterioration of fascias, gutters, soffits, and performance of flashings. E. Remove accumulations of soil which may support plant life resulting in roof damage. F. Inspect condition of flat roof surface for blisters and ridges, splits or cracks in the membrane, open end or lap joints in the cap sheet or membrane, exposed felts or deterioration of any component of the roof system. ; Clean all gutters and downspouts to ensure proper drainage. O. Inspect gutters to ensure they are secured to building correctly. P. Inspect shingles / tiles and replace with matching where needed. Q. All caulking should be touched up and filled in where required. R. Inspect all metal roofing for rust and loose fasteners.
