Specifications include, but are not limited to:The unit described under these specifications shall be a Henderson FSH II Hydraulic driven sand/salt spreader with pre-wetting liquid spray system or approved equal. Bidder shall ensure system is compatible with City of Minot trucks. Bidder shall provide all parts and equipment to City of Minot for installation by City of Minot personnel. Any deviations from the specifications shall be clearly identified by the vendor on a separate sheet attached to the bid proposal. BodyBody shall be 201 Stainless Steel, slide-in type construction: - 10 Gauge sides and ends; 7 Gauge sills and floor - Capacity shall be 7.6 cubic yard V-box type - Inside length shall be 11 feet - Height shall be 56” - Top width shall be 84” - All hardware shall be stainless steel - Mild steel standard top grates - Mild steel trunion tailgate latch kit Conveyor System Rear discharge pintle chain type – 24” wide 50:1 ratio, 1.5" shafts, 8 tooth sprockets, spring loaded idler adjustments
