Specifications include, but are not limited to: SCOPE -- SURFACES TO BE FINISHED A. Paint all exposed surfaces except where indicated not to be painted or to remain natural; the term "exposed" includes areas visible through permanent and built-in fixtures when they are in place. B. Paint the surfaces described in PART 2, indicated on the Drawings, and as follows: 1. If a surface, material, or item is not specifically mentioned, paint in the same manner as similar surfaces, materials, or items, regardless of whether colors are indicated or not. C. Do Not Paint or Finish the Following Items: 1. Items fully factory-finished unless specifically noted; factory-primed items are not considered factory-finished. 2. Items indicated to receive other finish. 3. Items indicated to remain naturally finished. 4. Fire rating labels, equipment serial number and capacity labels, and operating parts of equipment. 5. Anodized aluminum. 6. Polished and brushed stainless steel items. 7. Brick, precast concrete, integrally colored plaster.
