Specifications include, but are not limited to: Fully automated for unattended short- and long-duration testing. A furnace with a uniform maximum working temperature of at least 1000C Furnace should accommodate o Single-cell or Stack with each cell of 100-cm2 . o Stack cross-section or form factor: circular, square and rectangular. Class 1, Division 2, Group B or equivalent enclosure for safe operation with a combustible gaseous mixture containing CO, H2, and CH4, as well as pure H2 with flash back prevention. Continuous data acquisition with onsite and remote monitoring and remote controlling capability. Anode and cathode gas humidifier system with variable steam injection capability. Chromium protection /barrier for protecting stack and cell testing. Exhaust gas flow measurement at cell/stack exit. Gas sampling capabilities at fuel supply and exit to enable analysis. Continuous cell voltage monitoring. Auxiliary temperature measurements with 1 2 channels. Auxiliary pressure measurements with 1 2 channels (Note: Voltage input 0-10V) .
