Specifications include, but are not limited to: The scope of services is anticipated to include analysis of condition and performance of existing roofing/building envelope systems and design of roof/building envelope system rehabilitation, repair and/or replacement at facilities owned by the District. These improvements will address elements of the facilities that have been identified as an immediate or critical need by the District. 2.1 Roof/Building Envelope Design: The roof/building envelope design shall include full bid documents, including CAD drawings and specifications, assistance with the bid process and review, pre-bid, and preconstruction meetings. 2.2 Additional Services: In addition to roofing/building envelope analysis and design services, the type of design services may include, but not necessarily be limited to, the other related disciplines of design services as follows: Architectural, Structural Engineering, HVAC Engineering, Plumbing Engineering, and Electrical Engineering. It is also expected that the consultant shall provide basic Construction Administration for this project as described below. 2.3 Construction Administration: Construction Administration Services shall include, but not be limited to, submittal review and approvals, construction site observation, response to Requests for Information, issuance of Proposal Requests, review of Proposals, providing of recommendations for modifications, review of Applications for Payment, Final Inspection, and project closeout documentation. In general, the Consultant will be expected to provide Construction Administration consistent with industry standards. 2.4 Roof Survey: Optional Before re-roofing the facility or making major repairs, the Consultant shall visually inspect the roof and: 2.4.1 Provide a Roof Survey Report of existing roof conditions which shall include the following: (1) Identify and describe all roofing problem anomalies (If a complete roof survey is included). (2) Identify and describe any visual survey defects that may be harmful to the roof. (3) Give the causes for each anomaly and defect. (4) Recommend alternate courses of corrective action for defects and anomalies harmful to the roof. (5) Provide a cost estimate for correcting the defects and anomalies. 2.4.2 Detailed Roof Survey: A non-destructive roof moisture survey performed by an experienced and qualified professional as approved by the District. The roof moisture survey shall use infrared, nuclear, electronic field vector mapping, or electronic leak detection to locate unacceptable moisture within a roofing system.
