Specifications include, but are not limited to: 1.) Coordination with occupants and operations of the facility. 2.) Demo and removal with off-site disposal of existing materials as required. 3.) Fill and leveling of floor as required. 4.) Patching and finishing to match adjacent finishes as required. 5.) Modifying / replacing ceiling grid and tiles as required. 6.) New drywall taped, bedded, and floated out as required. 7.) Wall finishes as required to match existing. 8.) Floor covering materials, accessories, etc., to match existing as required. 9.) Transitions and base installations as required. 10.) New / security doors / windows as indicated with security hardware, etc. 11.) Double layer 5/8” drywall at exterior public accessible side (single layer on DPS side) of interior walls taped, bedded, and finished (texture / paint). 12.) MEP / FA modifications as required (extend HVAC supply ducts to new isolated areas. Relocate ducts / registers as required and patch ceilings. 13.) Data drop relocations as required. 14.) Clean up. 15.) Close out processes. CARPET 1. Carpet must meet the following minimum requirements: Mohawk/Lees series is the basis of requirements. A. Construction: Tufted B. Surface Texture: Level Multi-colored Loop C. Pile Thickness: .153” D. Gauge: 1/10 E. Stitches: 11.5 per inch F. Yarn Weight: 26 oz. per sq. yd. minimum G. Density: 6118 H. Face Yarn: dura-color® Premium Nylon I. Dye Method: Solution dyed/Space Dyed J. Protective Treatment: Sentry Plus K. Size: 12’ Roll L. Static Control: 3.0 KV when tested under Standard Shuffle test (70 degrees, 20% RH) M. Flammability: 1. DOC-FF-1-70 Pill Test: Passes. 2. Floor Radiant Panel: Meets NFPA Class 1 when tested per ASTM-E-648 glue down. N. Smoke Density NFPA 258: Less than 450 Flaming Mode. O. Color Fastness: 1. Lightfastness - AATCC 16E-1982 - Dark color: Gray scale rating of 4 or better after 160 standard fading hours as compared to AATCC Gray Scale for evaluation change in color. 2. Ozone and Gas - AATCC 129-1981 - Rating 3 or better per color AATCC transference scale. P. Indoor Air Quality: Manufacturer must demonstrate that carpet is certified under the CRI Green Label plus Program. Q. Carpet Manufacturers: Subject to compliance with specifications, the following manufacturers and products are approved: Mohawk/Lees or approved equal. R. Pattern and Color: Understanding the importance of pattern and color for aesthetics, as well as appearance retention and maintainability, TXPDS reserves the right to reject any product or manufacturer based solely on pattern and color considerations.
