Specifications include, but are not limited to: Cooling System •Visual inspection of radiator or heat exchanger for leaks, damage, and obstruction. •Check radiator coolant level, replenish as required. •Test coolant for proper antifreeze percentage. •Test corrosion inhibitor concentration, record. •Check jacket water heater for proper operation and adjust thermostat setting as needed. •Inspect condition of radiator cap, gasket and sealing surface. •Visual inspection of water pump and cooling system gaskets for leaks. •Check belt tension and inspect for cracking and fraying if accessibility without disassembly permits. •Inspect pulleys for excessive wear and lubricate hub bearings as needed. •Inspect flexible water connections for cracking, leaks, and pliability. •Tighten hose clamps as needed. Lubrication System •Check oil level, replenish as required. •Check for excessive crankcase blow-by with engine running. •Visual inspection of front and rear crankshaft seals and lubrication system gaskets for leaks. •Inspect oil hose and connections for cracking, leaks, and pliability
