288 EACH NAICS 325199 Matl Code 6730681 EA COMPOUND, CABLE PULLING, 5-GALLON PAIL, LUBRICITY SHALL BE LDPE JACKETED CABLE ON PVC CONDUIT AT 200-POUNDS PER FOOT NORMAL PRESSURE, SHALL HAVE AN AVERAGE COEFFICIENT OF DYNAMIC AND STATIC FRICTION OF 0.08; NO WAXES,GREASES, OR SILICONES IN COMPOUND;CLING FACTOR SHALL BE SIX INCHES OF A ONE-INCH DIAMETER, CABLE SHALL HOLD AT LEAST 75GMS OF LUBRICANT FOR ONE MINUTE WHEN HELD VERTICALLY AT 70 DEGREES FAHRENHEIT; LUBRICANT SHALL BE NON-TOXIC AND NON-SENSITIZING AND CLEANUP MADE POSSIBLE WITH WATER;LUBRICANT SHALL HAVE NO FLASH POINT AND DRIED RESIDUE IS NON- FLAMMABLE. (APPROVED BY INDUSTRIAL HYGIENE SECTION, 5/87) MUST BE PACKAGED IN BUCKETS WITH TOP OUTER DIAMETER OF 11.950 +1.010 INCH, TOP OUT OF ROUND OF 1/8 INCH MAXIMUM, HEIGHT OF BUCKET SHALL BE 14-9/16 +-1/8-INCH WITH A WALL THICKNESS OF 90 MIL, WEIGHT OF BUCKET SHALL BE 945 GRAMS +-5 GRAMS AND ITS OVERFLOW CAPACITY SHALL BE 5 GALLONS 102 OUNCES; MADE OF RESIN WITH A PRIME HIGH DENSITY POLYETHYLENE(HDPE), COLOR: WHITE, WITH A HANDLE MADE OF 9 GAUGE GALVANIZED WIRE WITH INJECTION MOLDED NO-MARK PLASTIC GRIP. LID SHALL BE UNRATED WITH TOP OUTER DIAMETER OF 12.085 INCH +-.010 INCH, TOP OUT OF ROUND OF 1/8-INCH MAXIMUM, LID SHALL MEASURE 1.360 INCH WITH A WALL THICKNESS OF .090-INCH AND WEIGH 390 GRAMS, MADE OF RESIN WITH PRIME HIGH-DENSITY POLYETHYLENE(HDPE), COLOR: WHITE WITH A EPDM GASKET. "AMERICAN POLYWATER" #J-640X
