Exterior Upfit Construction 1. Custom Aluminum Crime Scene Van Body 10’ Long x 7’ Wide x 6’ Inside height box van-style truck body, all aluminum construction, 4” structural channel longsills, 3” structural channel crossmembers on 16” centers, 1”x6” extruded aluminum floor plank, 1-1/2” box tube wall framing, .040” prepainted white aluminum exterior skin, taped to studs, screwed at seams, .040 seamless aluminum roof over 1-1/4” roof bows on 24” centers, extruded radius front corner posts, top rail and bottom rub rail, cast aluminum front corners and radius roof leading edge, and 19” formed aluminum rear corner posts and door header. 2. Integral side compartments w/ exterior access on both sides as follows: 31”L x 60”H x 17”D front compartment, 36”L x 24”H x 17”D rear under-floor compartment w/ double door. 3. Continuous integral wheel skirt w/ wheel flare. 4. Double panel aluminum compartment doors with stainless steel external strap hinges and whale tail compression latches, clip-on automotive-style door seal, and gas spring door holders. 5. 44”W x 72”H rear door opening w/ aluminum roll-up shutter door and recessed entry step. Shutter door locks independently from compartments and can be operated from inside 6. 12”D Full-width aluminum rear deck bumper w/ handrails and folding entry step. 7. Body side compartment exterior and doors painted white to match body exterior skin. Corner vertical and roof perimeter extrusions left natural aluminum. 2.1.2 Interior Upfit Construction 1. Body floor, Rear bumper and steps spray-lined. 2. LED grommet-mounted STT, reverse and marker lighting. 3. Poly-woven full height white liner on inside walls. 4. Insulated walls and ceiling. 5. 38” High, 33” deep full-width countertop work area between front cabinets...