The purpose of this specification is to outfit a 2026 Ford F-550 Cab and Chassis as per the following requirements. The vehicle has already been procured by The County of San Diego. All systems, components, parts, and materials provided by the vendor shall be new and unused, with full manufacturer's warranties in effect starting on the date of acceptance by the county 1. Vehicle Information 1.1. 2026 Ford F-550 Cab and Chassis 1.2. 6.7 Diesel 4X4 Powertrain 1.3. Crew Cab-Cab to axel 60” with 179” WB (W5H) 2. Scope of Work 2.1. Utility Body Spring Mounted with the following approximate dimensions: 2.1.1. 66” Height x 107.25” Length x 96” Width. All cabinets to be uniform in height. 2.1.2. Consisting of 5 compartments: One compartment shall be transverse at the front behind the cab with an approximate interior of 96” in length and shall be divided into two sections with 45” minimum for each side. There shall follow a Horizontal compartment on each side above the wheels and a vertical compartment on each side after the wheels. Compartment doors shall use stainless steel blind bolt hinges. Pillowblock hinge or other type not acceptable. 2.2. Street Side 2.2.1. First compartment Transverse behind cab to have an aluminum finished rear roll up door, Romcorp or equal, with electric locks and keyed to allow keyless entry, monitored from driver area, rear roll up doors should maximize compartment space by using side rails/tracks and counterbalanced. 2.2.2. Transverse compartment shall be divided in two sections measuring 47" at center of compartment from frame of door, driver side section will include a 3-tier storage system with telescopic shelves/drawers. Modification or fabrication of system to maximize compartment space shall be approved by County of San Diego. Recommended extensions: Slide Master Model SMEX (Straight slid) and Model SMT (tilt Down) or County approved equal.
