Following receipt of a task order from the City's Community Development Department, Service Provider shall design and fabricate signs that meet the specifications requested by City including size, color and written content requested. Service Provider shall furnish all labor, tools, equipment and materials necessary to design and fabricate such signs. Service Provider shall design each requested sign and prepare a layout and specifications for the fabrication and installation of such sign. The layout referenced above shall include, at a minimum, a plot map noting suggested sign placement. Service Provider shall forward the proposed design, layout, fabrication and installation information to City for review and approval no more than three (3) days after Service Provider’s receipt of the applicable order from City. Service Provider shall obtain written approval from the City prior to commencing sign fabrication. Sign fabrication shall be completed no later than two (2) days after Service Provider’s receipt of written approval from the City authorizing such sign fabrication. All signs fabricated hereunder shall meet the following requirements, unless otherwise approved in writing by City: A. Signs shall measure a minimum of 36 inches tall by 48 inches wide; B. Signs shall be mounted on poles or posts to a maximum height of 10 feet; C. Signs shall feature color text and/or graphics as approved by the City; and D. Whenever possible, existing fabricated signs shall be reused...
