a. One (1) each: DM-FMT18-M Del Medical FMT18M Floor Mounted Tube Stand with touchscreen display ▪ 10 ft. (305 cm) Floor Plate ▪ Platform tube mount ▪ Focal spot travel: ▪ Transverse travel range: 11 in. (28 cm) ▪ Vertical travel range: 64.5 in. (164 cm) ▪ Minimum ceiling height: 87 n. (221 cm) ▪ Pressure activated 180° column rotation ▪ +180° tube rotation about the horizontal axis ▪ Front display digital readouts: SID, horizontal tube rotation angle, receptor and generator techniques selections, and collimator information (when paired with auto collimator) ▪ Control buttons for the following actions: (located on the control handle) ▪ Longitudinal lock, transverse lock, vertical lock, column rotation roll lock, all locks and automatic detent aligns focal spot to image receptor ▪ Electromagnetic locks One (1) each: COL-SIEMENS-M2 Siemens Manuel Collimator (ML03) Item Includes: ▪ Lamellae close to the source to shield off extra focal radiation ▪ Bucky light generated by laser guarantees a sharp light line for all source to image distances ▪ Rotation by +/-45° with a stop in 0° position by swiveling flange ▪ Tape measure integrated in a user-friendly way in the collimator ▪ Two foam protected accessory rails facilitate attachment of additional devices and further filters ▪ LED powered light field for better contrast and greater lifetime One (1) each: DM-CM40DR Del Medical CM Series DR 40kW, 500mA, High Frequency Single or Three Phase Generator ▪ 125 kVp ▪ Digital Interface for integration with Digital Radiography systems ▪ Anatomical Programming with 768 programmable technique selections ▪ One, Two, or three-point technique selection ▪ Two Bucky Capability ▪ Power Cabinet with Auxiliary Power Supply ▪ Tube Protection Circuitry ▪ Integrated service software assists in calibration and service ▪ Self-diagnostic circuitry with error code recording for fast trouble shooting One (1) each: DM-CM-CSL-MINI Mini Console for Del Medical CMDR Series Generator (for use with Integrated Digital Systems) One (1) each: DM-CM-DR-DW Del Medical CMDR Series Digital Interface for DELWORKS DR (Please note: applicable only for CMDR Series Generators) One (1) each: TUBE-IAE42-90 IAE 42FX Tube ▪ 90º cable arms, 0.6x1.5mm FS, 200kHU, 125kVp, 14º target, 3" anode One (1) each: DM-CAB-HV-40 40’ Generator High Voltage Cables, 150kVp One (1) each: DM-EV800 Del Medical EV800 Elevating Table with Four-Way Float Top ▪ 800 lb. (363 kg) patient load capacity ▪ 86.5” (220 cm) x 36 (91 cm) fiber resin table-top ▪ Height adjustment: 22.25 in. (56.5 cm) to 34.25 in. (87 cm) ▪ Table top movement: +/-19.75 in. (50 cm) longitudinal, +/-6.5 in. (16.5 cm) transverse ▪ Bucky travel: +/-8.5 in. (22 cm) longitudinal ▪ Quiet duty motor with efficient elevating action ▪ Recessed foot treadle lock controls for longitudinal and transverse, table top up/down movement ▪ Integral collision safety sensors One (1) each: DM-GC-TRAY Grid cabinet, 17 in. x 17 in. (43 cm x 43 cm) and One deluxe, heavy-duty manual cassette tray One (1) each: DM-EV800-CBA EV800 Adaptation Kit Includes: Universal Control unit for CANbus communication Differential SID Sensor One (1) each: DM-TBL-REMOTE Tabletop hand control, controls all table functions (elevation and four-way float of top) For use on the following: EV800
