TECHNICAL SPECIFICATIONS: Table size 1550 mm x 3750 mm (61” x 147.63”) Pop-Up Positioning Pins 8 – 90mm height Vacuum Zones per Table 4 (four) Axis stroke X axis: 3880 mm (152.75”) Y axis: 1835 mm (72.24”) Z axis: 250 mm (9.84”) Maximum Feed Rate X-axis: 80 meters/min (3,149”/min) Y-axis: 60 meters/min (2,360”/min) Z-axis: 20 meters/min (787”/min) Maximum Rapid Traverse All-axis: 100 meters/min (3,341”/min) Spindle #1 - Router Spindle Spindle #2 - Line Boring Unit Spindle type Anderson Air Cooled Spindle type: Line Boring Unit Motor power 12 HP (S6): 10 HP (S1) Motor Power: 2 HP Spindle speed (RPM) 1000-22000 Spindle speed: 4,500 rpm No. of changeable tools 8 Vertical Drills: 5 X 5 Spindle nose HSK63F taper Drill Shank Dia: 10 mm HSK 63F tool holders 8 sets (Holder & Locknut) Aggregate Torque Ring SHALL BE INCLUDED Collet Sizes Included (4) ½”, (4) 3/8” (4) ¼” & (4) ¾” (total # of collets: 16) (Router Spindle and Drill Head both fully cover the entire working table) Tool holders and collets, with cast iron tool set-up stand, shall be included Vacuum hold down system Dekker pump model VMX0453KA1: Power (per pump) 25HP Flow (per pump) 420 cfm Total Pressure 29" Hg Machine footprint Floor area 154” x 188” Height 90.5”
