Surface Preparation • Protect all adjacent surfaces, furnishings, and fixtures from dust, paint, overspray, or damage. • Clean and prepare surfaces per manufacturer’s instructions and PDCA (Painting and Decorating Contractors of America) standards. • Repair minor imperfections (filling cracks, nail holes, light patching). • Prime bare or repaired surfaces prior to finish coat application. Painting • Apply paint system primer, base coat, finish coat specifications. • Use only paint products approved by the City of New Rochelle and in compliance with VOC requirements under NYS Environmental Conservation Law. • Colors and sheen to be verified and approved prior to application. • All coatings shall be applied uniformly, without streaks, runs, laps, or missed areas. • Contractor is responsible for proper mixing, thinning, and application as per manufacturer’s recommendations. Final Finishing & Cleanup • Remove masking, protective coverings, and debris daily. • Final cleaning of all painted areas to remove dust, smudges, or marks. • Restore areas damaged during work to original condition. • Lawful disposal of all waste materials per NYS DEC and local regulations.
