Line 1 Silver color badge: 600 EA Badge to be made of 14 gauge silver-tone material with 2.5 mils polished rhodium finish material. To have a pin back safety catch (F-36), to be made of nickelsilver material. Below eagle on top of badge will be agency acronym as per Attachment C - Agency List At bottom of badge will be badge number to be assigned by agency. State of Louisiana Seal: The recessed circle in the center of the blank to receive an 11/16" full color hard fired enamel State of Louisiana Seal. V.H. Blackinton die #8 (A2769). Border of seal to bear the lettering of "STATE OF LOUISIANA" on a dark blue (DR6-17) enamel background. Inner circle of seal to be the Louisiana State Seal showing the pelican in white enamel on a light blue (DR6-63) enamel background, with pelican sitting on a brown (DR8-1) enamel nest encircled with "UNION JUSTICE CONFIDENCE". (See Attachment B for picture) Badge is approx. 1-1/2"W X 2-1/2"H Blackinton B38, MTM Elite, Smith & Warren #M180, or equaliavent. Specify brand bidding (& number if applicable): Line 2 Gold color badge: 125 EA Badge to be made of 14 gauge brass with copper flash & nickel plate. Preparations for a 24K gold plate finish 0.9 mils thickness. To have a pin back safety catch (F-36), to be made of nickel-silver material. Below eagle on top of badge will be unit rank assigned by agency spelled out as follows: LIEUTENANT, MAJOR, CAPTAIN, LT. COLONEL OR COLONEL. At bottom of badge will be agency acronym as per Attachment C - Agency List. State of Louisiana Seal: The recessed circle in the center of the blank to receive an 11/16" full color hard fired enamel State of Louisiana Seal. V.H. Blackinton die #8 (A2769). Border of seal to bear the lettering of "STATE OF LOUISIANA" on a dark blue (DR6-17) enamel background. Inner circle of seal to be the Louisiana State Seal showing the pelican in white enamel on a light blue (DR6-63) enamel background, with pelican sitting on a brown (DR8-1) enamel nest encircled with "UNION JUSTICE CONFIDENCE". (See Attachment B for picture) Badge is approx. 1-1/2"W X 2-1/2"H Blackinton B38, MTM Elite, Smith & Warren #M180, or equalivalent Specify brand bidding (& number if applicable): Line 3 Unit Insignia: 200 EA Lieutenant bar (1-bar), smooth, small size Color: Gold Plated metal Approx. 3/4"W X 1/4"H To be made of 14 gauge brass with copper flash & nickel plate preparations for a 24K gold plate finish 0.9 mils in thickness. To have a clutch back safety catch (2-F9), to be made of nickelsilver material. (See Attachment B for picture) Blackinton J61, MTM Elite, Smith & Warren W Series, or equalivalent Specify brand bidding (& number if applicable): _____________________________________________ Line 4 Unit Insignia: 100 EA Lieutenant bar (1-bar), smooth large size Color: Gold plated metal Approx. 1"W X 3/8"H To be made of 14 gauge brass with copper flash & nickel plate preparations for a 24K gold plate finish 0.9 mils in thickness. To have a clutch back safety catch (2-F9), to be made of nickelsilver material. (See Attachment B for picture) Blackinton J62, MTM Elite, Smith & Warren W Series, or equalivalent Specify brand bidding (& number if applicable): _____________________________________________ Line 5 Unit Insignia: 100 EA Captain bars (2-bars), smooth, small size Color: Gold plated metal Approx. 13/16"W X 3/4"H To be made of 14 gauge brass with copper flash & nickel plate preparations for a 24K gold plate finish 0.9 mils in thickness. To have a clutch back safety catch (2-F9), to be made of nickelsilver material. (See Attachment B for picture)
