1). Rotary SP012 Wide Automotive Symmetric 2-Post Lift 12,000 lbs Capacity & Installation – (Quantity 1) Vehicle lifts for EVs often require higher weight capacities because electric vehicles, especially heavy-duty trucks and SUVs, are significantly heavier than their traditional gasoline counterparts due to the large battery packs they contain. This increased vehicle weight directly translates to greater stress on lifting equipment, necessitating higher capacity lifts with reinforced structures to ensure safe and stable operation during maintenance procedures. The wider stance makes it easier to service wide trucks and battery electric vehicles. MUST include the following features: Two post symmetric automotive lift Red color 12,000 lbs lift capacity Minimum rise height of 75” Minimum overall width of 12” 10” Minimum overall height of unit 13’ Maximum overall height of unit 14” Minimum drive-thru width of 119” Minimum bay size 14’ x 26’ Front and rear 3-stage arms Front and rear arms minimum retracted length 27-1/2” Front and rear arms maximum extended length 59” Screw-up frame cradles with a minimum height of 4-3/4” Quantity of four, 3-1/2” stack adapters Quantity of four, 5” stack adapters Quantity of four screw up EV pads 2 HP motor, 208-230V Maximum time of full rise 60 seconds Must be ALI (Automotive Lift Institute) certified Installed with all necessary hardware for installation, less final electrical connection
