Installation: 1. The installer shall be responsible to ensure the proper location of the generator on the trailer to obtain the best working results. 2. The generator shall be mounted directly to the trailer. 3. The installation shall be performed following state of the art. 4. The installer shall supply all required components. Trailer: • Brakes- Electric • Axles - one - two depending on manufacturer weight requirements. • Tongue Jack- topwind, dropfoot or equal • Rear Stabilizer jacks, sidewind, dropfoot or equal • Adjustable height 3" towing eye or Ball Hitch • Safety chains with hook and latch • 6 prong electrical connection • Recessed lights and reflectors to meet DOT standards • Fenders, Plastic or metal. • License Plate Holder. Generator: • Diesel powered engine 1 KW continuous power – 30 KW (min) / 35 KW (Max) • Unit mounted radiator • Mounted - Main Circuit Breaker • Mounted - Battery charger rated 12 Volts, 5 Amps • Mounted - Exhaust silencer • Mounted - Jacket water heater • Mounted - Heavy duty battery • Mounted - Battery Rack and Cables • Mounted - Vibration isolators • Mounted - Electronic governor • Mounted - Weatherproof enclosure • Sound Attenuated Enclosure. Unit mounted control panel must include the following: • Vo1t Meter • Amp Meter • Frequency Meter • Oil Pressure Gauge • Water Temperature Gauge • Ammeter • Hour Meter • Fuel Gauge • Volt adjustment Switch, 3 Phase 480/277, 3 Phase 208/120, 1 Phase 240/120 • E-Stop Button • Convenience Receptacles 110 volt GFCI 230 Volt
