1. Scope A: Steel Reinforced Polyethylene (SRPE) 1.1 Nominal Diameter: 60-inches 1.2 Installation Length: 300 LF per run 1.3 Number of Parallel Pipe Runs: 3 1.4 Joint Length: 20 LF (minimum) 1.5 Joint Type: Gasketed Bell and Spigot 1.6 Freight: FOB Destination; (30° 02’ 22” N, 94° 10’ 6” W); Unloading by Owner Reference ASTM F2562 - Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for NonPressure Drainage and Sewerage ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM D 3212-21 - Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals ASTM D2321-20 – Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications 2. Scope B: Fiberglass Reinforced Polymer Mortar (FRPM) Pipe 2.1 Nominal Diameter: 60-inches 2.2 Installation Length: 300 LF per run 2.3 Number of Parallel Pipe Runs: 3 2.4 Joint Length: 20 LF (minimum) 2.5 Pipe End Squareness: Pipe ends shall be square to the pipe axis with a maximum tolerance of 1/8”. 2.6 Freight: FOB Destination; (30° 02’ 22” N, 94° 10’ 6” W); Unloading by Owner Reference ASTM D3262 - Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe. ASTM D3262 - Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe. ASTM D4161 - Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals. ASTM D2412 - Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel- Plate Loading. ASTM D3681 – Standard Test Method for Chemical Resistance of “Fiber glass” Pipe in a Deflected Condition. ASTM D638 – Test Method for Tensile Properties of Plastics.
