SITE SPECIFICATIONS: The building is equipped with following electricity, if machine cannot operate using the supplied power, a transformer or phase changer as necessary must be included in the quote: • 480/277 Volt, 3PH 60Hz (30 amps max) • 240/120 Volt, 1PH 60Hz (15 amps max) • 208/120 Volt, 3PH 60Hz (70 amps max) EQUIPMENT SPECIFICATIONS: • Axes Requirements: a. Minimum X-axis travel: 22” b. Minimum Y-Axis: travel 14” c. Minimum Z-Axis travel: 11” d. Minimum U-Axis travel: 3” e. Minimum V- Axis travel: 3” f. Axis Drive: Precision linear motor g. Maximum taper angle at 4” thickness: 15° h. Maximum Simultaneously controlled axes: 4 axes • Minimum workpiece size: a. The machine must be able to accommodate a workpiece of thickness 11” b. The machine must be able to accommodate a workpiece of width 15” c. The machine must be able to accommodate a workpiece of length 20” d. The machine must be able to accommodate a workpiece weight of 1000lbs • Material Requirements: a. Steels and Stainless Steels (EX: 316L, 17-4 PH; Tool Steel - EX: H13) b. Titanium alloys (EX: Ti-6Al-4V) c. Aluminum Alloys (EX: Al-Si10-Mg, Aluminum 5183) d. Nickel alloys (EX: Inconel 718, Haynes 282) • Machine Control: a. Machine control must be in English b. Accept USB or LAN interfaces c. The machine must be capable of simultaneous axis movements d. The machine must be capable of pitch compensation • Electrical Requirements: a. Machine must be UL certified
