2.1 Project Tasks The following tasks are a representation of the materials testing and special inspection services that the selected consultant reasonably could expect on a project. This list is not conclusive and additional inspections and material tests may be necessary. Structural Steel Inspections for: • Field Welding and Erection • High Strength Bolting • Embeds • Shop Welding & Fabrication Inspection • Welding Procedure and Welding Qualifications • Cold Form Steel Framing Structural Concrete Inspection for: • Concrete Placement • Rebar (reinforcing steel) Placement • Pre-stressed Concrete • Post-Tensioned Concrete • Tendon Stressing • Lightweight Concrete • Epoxy/Polymer Concrete • Precast Plant Inspection • Batch Plant Inspection • Auger Cast Pile Grouting Concrete Sampling for: • Temperature • Slump • Unit Weight/Yield • Air Content - Pressure or Volumetric • Fabrication of Compressive Strength Cylindrical Specimens Structural Masonry Inspection for: • Rebar (reinforcing steel) Placement • High-Lift Grout Placements • CMU Block Sampling • Masonry Prism Sampling & Specimen Fabrication • Brick Sampling • Mortar Sampling & Specimen Fabrication • Grout Sampling & Specimen Fabrication Proprietary Anchor Inspection for: • Cast In-place Anchors - Hex Head Bolt, L-Bolt, J-Bolt, Headed Stud • Adhesive or Epoxy Anchors - Threaded Rod, Hex Head Bolt, Rebar • Mechanical Anchors - Expansion & Screw • Seismic Resisting Systems • Suspended Ceilings • Mechanical Piping Systems
