ULS Diesel Fuel must be a high quality ULS Bio-Diesel (B2) blend. It must meet the specifications attached hereto and incorporated herein as “Exhibit A”. Diesel Fuel will be seasonally and geographically blended for low temperature and performance to ensure a low cloud point and pour point. Diesel Fuel must have: 1. Specifications per ASTM D975 S15 2. A dispersant to guard against clogging filters 3. An extra lubricity added 4. Glycol Ether to shed water 5. An antioxidant for storage life 6. A metal deactivator to suppress gum and varnish 7. A corrosion inhibitor 8. A low sulfur content, .05 wt. % maximum 9. Must be blended with a minimum 2% pure Bio-Diesel (Specifications per ASTM D6751-08 Standards for S15 Grade) 10. Winter blend shall be with ULSD #1 per ASTM specifications 11. Winter blend shall have a Cloud Point Minimum of -25°F and Pour Point Minimum of -30°F and shall be available November through February unless otherwise stated by County Engineer 12. Submit spec sheet for diesel fuel additives Samples for testing may be pulled at any time to verify specifications, if necessary...
